Concentric Reducer

Product Detail

EO Flanges is a well-known factory of Concentric Reducer, which has soaring tensile potency. Concentric Reducers are quality accepted on distinct industry standards by the capable quality specialists. The Concentric Reducers are available in variety of shapes and dimensions to suit major pipeline installation requirements in industries. This is one of the most commonly used industrial pipe fitting for adapting different pipe sizes in a pipeline system. It is primarily used to connect two pipes with different diameters.

Made from best grades of stainless steel, these reducers are available in a wide range of sizes, wall thicknesses and pressure ratings to choose from according to the pipeline. Ensuring an in-line conical transition between different diameters of pressurized pipes, these concentric reducers join the pipelines on the same axis. The construction of these reducers is done by joining the small diameters and large diameters on opposite ends of cone shaped transition section. Find application in petrochemicals, sugar mills & distilleries, steel plants and cement & construction industries, the reducer has separate inlet and outlet ends.



 

Concentric Reducer Dimensions table:

Nominal pipe size	Sch.*	Dimensions in mm					Weight
in.		D	D1	t	t1	H	kg/pce
3/4 x 1/2	10s	26.7	21.3	2.11	2.11	39.3	0.1
	40s	26.7	21.3	2.87	2.77	39.3	0.14
	80s	26.7	21.3	3.91	3.73	39.3	0.18
1 x 1/2	10s	33.4	21.3	2.77	2.11	50.8	0.12
	40s	33.4	21.3	3.38	2.77	50.8	0.15
	80s	33.4	21.3	4.55	3.73	50.8	0.2
1 x 3/4	10s	33.4	26.7	2.77	2.11	50.8	0.13
	40s	33.4	26.7	3.38	2.87	50.8	0.16
	80s	33.4	26.7	4.55	3.91	50.8	0.22
1¼ x 1/2	10s	42.2	21.3	2.77	2.11	50.8	0.103
	40s	42.2	21.3	3.56	2.77	50.8	0.132
1¼ x 3/4	10s	42.2	26.7	2.77	2.11	50.8	0.18
	40s	42.2	26.7	3.56	2.87	50.8	0.22
	80s	42.2	26.7	4.85	3.91	50.8	0.25
1¼ x 1	10s	42.2	33.4	2.77	2.77	50.8	0.18
	40s	42.2	33.4	3.56	3.38	50.8	0.22
	80s	42.2	33.4	4.85	4.55	50.8	0.27
1½ x 1/2	10s	48.3	21.3	2.77	2.11	63.5	0.2
	40s	48.3	21.3	3.68	2.77	63.5	0.25
1½ x 3/4	10s	48.3	26.7	2.77	2.11	63.5	0.2
	40s	48.3	26.7	3.68	2.87	63.5	0.26
	80s	48.3	26.7	5.08	3.91	63.5	0.37
1½ x 1	10s	48.3	33.4	2.77	2.77	63.5	0.2
	40s	48.3	33.4	3.68	3.38	63.5	0.26
	80s	48.3	33.4	5.08	4.55	63.5	0.34
1½ x 1¼	10s	48.3	42.2	2.77	2.77	63.5	0.21
	40s	48.3	42.2	3.68	3.56	63.5	0.28
	80s	48.3	42.2	5.08	-4.85	63.5	0.36
2 x 1/2	80s	60.3	21.3	5.54	3.73	76.2	0.38
2 x 3/4	10s	60.3	26.7	2.77	2.11	76.2	0.25
	40s	60.3	26.7	3.91	2.87	76.2	3.37
2 x 1	10s	60.3	33.4	2.77	2.77	76.2	0.28
	40s	60.3	33.4	3.91	3.38	76.2	0.4
	80s	60.3	33.4	5.54	4.55	76.2	0.54
2 x 1¼	10s	60.3	42.2	2.77	2.77	76.2	0.3
	40s	60.3	42.2	3.91	3.56	76.2	0.44
2 x 1½	10s	60.3	48.3	2.77	2.77	76.2	0.31
	40s	60.3	48.3	3.91	3.68	76.2	0.45
	80s	60.3	48.3	5.54	5.08	76.2	0.59
2½ x 1	10s	73	33.4	3.05	2.77	88.9	0.43
2½ x 1½	10s	73	48.3	3.05	2.77	88.9	0.44
	40s	73	48.3	5.16	3.68		0.769
2½ x 2	10s	73	60.3	3.05	2.77	88.9	0.47
	40s	73	60.3	5.16	3.91	88.9	0.8
	80s	73	60.3	7.01	5.54	88.9	1.03
3 x 1	10s	88.9	33.4	3.05	2.77	88.9	0.49
	40s	88.9	33.4	5.49	3.38	88.9	0.85
						88.9
3 x 1¼	40s	88.9	42.2	5.49	3.56	88.9	0.75
3 x 1½	10s	88.9	48.3	3.05	2.77	88.9	0.51
	40s	88.9	48.3	5.49	3.68	88.9	0.94
	80s	88.9	48.3	7.62	5.08	88.9	1.21
3 x 2	10s	88:09:00	60.3	3.05	2.77	88.9	0.55
	40s	88.9	60.3	5.49	3.91	88.9	1
	80s	88.9	60.3	7.62	5.54	88.9	1.29
3 x 2½	10s	88.9	73	3.05	3.05	88.9	0.59
	40s	88.9	73	5.49	5.16	88.9	1.08
	80s	88.9	73	7.62	7.01	88.9	1.49
4 x 1½	10s	114.3	48.3	3.05	2.77	101.6	0.71
	40s	114.3	48.3	6.02	3.68	101.6	1.18
4 x 2	10s	114.3	60.3	3.05	2.77	101.6	0.78
	40s	114.3	60.3	6.02	3.91	101.6	1.57
	80s	114.3	60.3	8.56	5.54	101.6	1.95
4 x 2½	10s	114.3	73	3.05	3.05	101.6	0.83
	40s	114.3	73	6.02	5.16	101.6	1.66
4 x 3	10s	114.3	88.9	3.05	3.05	101.6	0.87
	40s	114.3	88.9	6.02	5.49	101.6	1.74
	80s	114.3	88.9	8.56	7.62	101.6	2.33
5 x 2½	10s	141.3	73	3.4	3.05	127	1.4
5 x 3	10s	141.3	88.9	3.4	3.05	127	1.45
	40s	141.3	88.9	6.55	5.49	127	2.85
5 x 4	10s	141.3	114.3	3.4	3.05	127	1.49
	40s	141.3	114.3	6.55	6.55	127	2.98
6 x 3	10s	168.3	88.9	3.4	3.05	139.7	1.82
	40s	168.3	88.9	7.11	5.49	139.7	3.98
	80s	168.3	88.9	10.97	7.62	139.7	5.51
6 x 4	10s	168.3	114.3	3.4	3.05	139.7	1.95
	40s	168.3	114.3	7.11	6.02	139.7	4.08
	80s	168.3	114.3	10.97	8.56	139.7	5.96
6 x 5	10s	168.3	141.4	3.4	3.4	139.7	2.05
	40s	168.3	141.4	7.11	6.55	139.7	4.18
8 x 4	10s	219.1	114.3	3.76	3.05	152.4	3.02
	40s	219.1	114.3	8.18	6.02	152.4	6.55
8 x 5	10s	219.1	141.3	3.76	3.4	152.4	3.08
	40s	219.1	141.3	8.18	6.55	152.4	6.7
8 x 6	10s	219.1	168.3	3.76	3.4	152.4	3.19
	40s	219.1	168.3	8.18	7.11	152.4	6.94
10 x 6	10s	273.1	168.3	4.19	3.4	177.8	5
	40s	273.1	168.3	9.27	7.11	177.8	11.12
10 x 8	10s	273.1	219.1	4.19	3.76	177.8	5.25
	40s	273.1	219.1	9.27	8.18	177.8	11.56
12 x 6	10s	323.9	168.3	4.57	3.4	203.2	6.58
	40s	323.9	168.3	9.53	7.11	203.2	12.8
12 x 8	10s	323.9	219.1	4.57	3.76	203.2	7.67
	40s	323.9	219.1	9.53	8.18	203.2	15.98
12 x 10	10s	323.9	273.1	4.57	4.19	203.2	7.98
	40s	323.9	273.1	9.53	9.27	203.2	16.63
14 x 8	10s	355.6	219.1	4.78	3.76	330.2	13.88
14 x 10	10s	355.6	273.1	4.78	4.19	330.2	14.41
14 x 12	10s	355.6	323.9	4.78	4.57	330.2	15.29
16 x 8	10s	406.4	219.1	4.78	3.76	355.6	16.5
16 x 10	10s	406.4	273.1	4.78	4.19	355.6	17.72
16 x 12	10s	406.4	323.9	4.78	4.57	355.6	18.35
16 x 14	10s	406.4	355.6	4.78	4.78	355.6	18.9
18 x 14	10s	457.2	355.6	4.78	4.78	381	21.9
18 x 16	10s	457.2	406.4	4.78	4.78	381	19.2
20 x 16	10s	508	406.4	5.54	4.78	508	38.41
20 x 18	10s	508	457.2	5.54	4.78	508	33.1

 



Production flow of Concentric Reducer













Packaging for Concentric Reducer in bundles wrapped with strong steel strip, seaworthy packing, or according to customers’ requirements.

Delivery of Concentric Reducer is normally 15-30days after receiving T/T deposit



Q: Are you a trading company or a manufacturer?

A: we are factories, and we do trade as well

Question: how long is your delivery time of Concentric Reducers?

A: If Concentric Reducers are in stock, it usually takes 5-10 days. If Concentric Reducers are not in stock, they are for 15-20 days, according to quantity.

Q: Do you provide Concentric Reducers samples? Is it free or extra?

A: Yes, we can supply the Concentric Reducers sample free of charge, but we don't pay the freight.

Q: What are your terms of payment for Concentric Reducers?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shipment.