ASTM A334 Low Temperature Pipe
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
EO Flanges is a well-known factory of ASTM A334 Low Temperature Pipe, which has soaring tensile potency. This standard is issued under the fixed designation A 334/A 334M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.
ASTM A334 Low Temperature Pipe covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for using at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.
The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.
ASTM A334 Low Temperature Pipe is medium carbon steel pipe with max0.13 % carbon content with combination of Max 0.90% manganese. These seamless steel pipes most commonly used for general purpose applications worldwide. ASTM A334 Grade 8 pipeline is ductile and strong tube with long wearing properties. The carbon steel pipe is manufactured as per ASTM Specification and commercially referred as carbon steel tube.
ASTM A334 Low Temperature Pipe Chemical composition table:
Grade |
Mfg. Process |
Chemical composition (%) |
||||||||
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
Others |
||
Gr1 |
S, E, AT |
0.30Max |
- |
0.40~1.06 |
0.05Max |
0.60Max |
- |
- |
- |
(STBL450) |
Gr3 |
S, E, AT |
0.19Max |
0.18~0.37 |
0.31~0.64 |
0.05Max |
0.050Max |
3018 |
- |
- |
- |
Gr6 |
S, E, AT |
0.30Max |
0.10Max |
0.29~1.06 |
0.048Max |
0.058Max |
- |
- |
- |
- |
Gr7 |
S, E, AT |
0.19Max |
0.13~0.32 |
0.90Max |
0.04Max |
0.050Max |
2.03~2.57 |
- |
- |
(STBL690) |
Gr8 |
S, E, AT |
0.18Max |
0.13~0.32 |
0.90Max |
0.045Max |
0.045Max |
8.40~9.60 |
- |
- |
(Cu 0.75~1.25) |
Gr9 |
S, E, AT |
0.20Max |
- |
0.40~1.06 |
0.045Max |
0.50Max |
1.60~2.24 |
- |
- |
- |
Production flow of ASTM A334 Low Temperature Pipe
Packaging for ASTM A334 Low Temperature Pipe in bundles wrapped with strong steel strip, seaworthy packing, or according to customers’ requirements.
Delivery of ASTM A334 Low Temperature Pipe is normally 15-30days after receiving T/T deposit
Q: Are you a trading company or a manufacturer?
A: we are factories, and we do trade as well
Question: how long is your delivery time of ASTM A334 Low Temperature Pipes?
A: If ASTM A334 Low Temperature Pipes are in stock, it usually takes 5-10 days. If ASTM A334 Low Temperature Pipes are not in stock, they are for 15-20 days, according to quantity.
Q: Do you provide ASTM A334 Low Temperature Pipes samples? Is it free or extra?
A: Yes, we can supply the ASTM A334 Low Temperature Pipes sample free of charge, but we don't pay the freight.
Q: What are your terms of payment for ASTM A334 Low Temperature Pipes?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance before shipment.
- JIS G3460 Low Temperature Pipe 1 Pieces / (Min. Order)
- 90 Degree Short Radius Elbow 5 Pieces / (Min. Order)
- 90 Degree Long Radius Elbow 5 Pieces / (Min. Order)
- Reducer Pipe Tee 1 Pieces / (Min. Order)
- Equal Pipe Tee 1 Pieces / (Min. Order)
- Eccentric Reducer 1 Pieces / (Min. Order)
- Concentric Reducer 1 Pieces / (Min. Order)
- 180 Dergee Pipe Elbow 1 Pieces / (Min. Order)
- 90 Degree Pipe Elbow 1 Pieces / (Min. Order)
- 45 Degree Pipe Elbow 1 Pieces / (Min. Order)
- JIS G3460 Low Temperature Pipe 1 Pieces / (Min. Order)
- ASTM A210 Boiler Tube 1 Pieces / (Min. Order)
- ASTM A192 Boiler Tube 1 Pieces / (Min. Order)
- ASTM A179 Boiler Tube 1 Pieces / (Min. Order)
- ASTM A178 Boiler Tube 1 Pieces / (Min. Order)
- ASTM A209 Boiler Tube 1 Pieces / (Min. Order)
- ASTM A250 Boiler Tube 1 Pieces / (Min. Order)
- ASTM A213 Boiler Tube 1 Pieces / (Min. Order)
- ANSI B16.5 Class 150 Plate Flanges Nominal Pipe Size 0.5-24 in 1 Pieces / (Min. Order)
- ANSI B16.5 Class 1500 Welding Neck Flanges Bore Specified by Purchaser 1 Pieces / (Min. Order)